To configure the settings of your Brother QL-810WC label printer prior to the event, please follow the instructions below.
Step 1. Install Drivers
As a first step, please download the printer drivers to your laptop / tablet.
All drivers are available here after selecting the type and version of the operating system you are using.
Step 2. Setup the Printer
As a next step, please plug the printer into power and connect it to the device (laptop / tablet) that you will be using.
Then place the label roll you will be using into the printer.
Step 3. Configure Settings
To configure the printer settings:
1. Navigate to the Printers & Scanners section on your device / laptop
2. Find the Brother QL-810WC printer in the list and click on it.
3. Go to Printing Preferences
4. A new dialog window will open. Adjust the following settings:
Paper Size - select the pre-cut label size or the width of the continuous label roll you will be using
If you are using continuous rolls, also enter the length of the label in mm under "Length".
Make sure the Orientation is set to Landscape.
Enable both options - "Cut every 1 label" and "Cut at end".
Once all is configured, click on Apply and then OK.
To ensure the printer functions correctly, it is recommended to print a test page via clicking on the relevant option in the printer settings menu.
Once you have configured your printer and installed PrintNode, you can add the printer to the Noodle Live portal and have it ready for badge printing.